* A pair of adjustable wrenches
* A piece of 2x4 lumber
* A rubber mallet
* A car jack
* A cinder block
Instructions:
1. Loosen the lug nuts on the buckled wheel.
2. Place the 2x4 lumber on the ground behind the buckled wheel.
3. Position the car jack under the 2x4 lumber, and raise it until the buckled wheel is off the ground.
4. Place the cinder block under the buckled wheel.
5. Use the rubber mallet to hit the buckled wheel until it is straightened.
6. Lower the car jack and tighten the lug nuts.
Tips:
* If the wheel is severely buckled, you may need to take it to a professional repair shop.
* Be careful not to hit the wheel too hard with the rubber mallet, or you could damage the wheel.
