1. Park your scooter on a level surface. Make sure the scooter is in a well-lit area so you can see what you're doing.
2. Turn on the headlights.
3. Locate the headlight adjustment screws. There are two screws, one on each side of the headlight.
4. Use a screwdriver to turn the adjustment screws. Turning the screws clockwise will raise the headlights, while turning them counterclockwise will lower the headlights.
5. Adjust the headlights until they are aligned properly. The headlights should be aimed so that they shine straight ahead and do not glare into the eyes of oncoming drivers.
6. Test the headlights. Take your scooter for a short ride to make sure the headlights are adjusted correctly.
Here are some additional tips for adjusting headlights:
* If you have difficulty seeing the adjustment screws, you may need to remove the headlight cover.
* Be careful not to overtighten the adjustment screws. This could damage the headlight assembly.
* If you are not comfortable adjusting the headlights yourself, you can take your scooter to a qualified mechanic.
By following these steps, you can safely and easily adjust the headlights on your 2011 TKMC MD50QT-5 scooter.
