1. Turn the ignition switch to the "OFF" position.
2. Remove the Phillips head screw located in the center of the door handle trim panel.
3. Pry up the door handle trim panel with a plastic pry tool until it pops off.
4. Remove the two Phillips head screws located behind the door handle trim panel.
5. Pry up the bottom edge of the door panel with a plastic pry tool until it pops off.
6. Lift up the door panel and disengage it from the window sill and side rails.
7. Disconnect the electrical connectors from the door panel.
8. Remove the door panel from the vehicle.
