2. Turn the key to the "on" position. This will cause the dash lights to come on.
3. Press the "valet" button. The valet button is located on the center console, near the gearshift. It is usually marked with a picture of a car with a key next to it.
4. Hold the valet button for five seconds. The alarm will sound three times, then stop. This indicates that the alarm has been disabled.
If you do not have the valet key, you can also disable the alarm by entering the factory code. The factory code is a four-digit number that is unique to your car. It can be found on a sticker in the driver's doorjamb or in the owner's manual.
To enter the factory code, follow these steps:
1. Turn the key to the "on" position.
2. Press the "valet" button three times.
3. Use the arrow keys on the radio to enter the factory code.
4. Press the "OK" button.
5. The alarm will sound three times, then stop. This indicates that the alarm has been disabled.
