Auto >> AutoSPT >  >> Electric car

How do you change battery on Honda key fob uyube?

To change the battery on a Honda key fob, you will need a small flathead screwdriver and a replacement battery.

Here are the steps:

1. Use the screwdriver to pry open the back of the key fob.

2. Remove the old battery from the key fob.

3. Insert the new battery into the key fob, making sure to match the positive (+) and negative (-) terminals.

4. Close the back of the key fob.

The key fob battery is a coin cell battery. The most common type is a CR2032, but some models may use a different type of battery. You can check the owner's manual for your vehicle to find the correct battery type.

Here are some additional tips:

* Be careful not to drop the battery. If you do, it may damage the key fob.

* Make sure the battery is inserted correctly. If it is inserted incorrectly, it may damage the key fob.

* If the key fob does not work after you have replaced the battery, check to make sure that the battery is properly inserted and that the contacts are clean.

* If the key fob still does not work, you may need to have it replaced.

Auto Repair
How do you replace a rear tail light on 2007 Dodge Ram 1500 truck? How do you replace starter on a 1998 Mitsubishi Diamante?
Car Care
Autotrader Reveals 7 New Cars With the Best Gas Mileage ‘Braking It Down’ With our BMW Service Center Technicians What Is Driver Assist?
Engine
Where is the fuse box for a 96 jetta? How do you find the fuse box in a Mercedes Benz 450 SLC?
Electric Car
Does the portable CD player come with a car charger? How do you change the transmission fluid on a 1996 Chevrolet Cavalier Z24? What is the correct placement of plug wires on a 2002 ford ranger 3.0 V6?
Autopilot
Where can you get a free auto scan? How do you change front struts on Toyota Echo?
Car Photos
Where is the keypad code located in 2003 Lincoln town car? Lug pattern of a 1993 Jeep Wrangler? In the event of a death is vehicle owned by decedent considered an asset estate?