1. A replacement park bulb. The correct type and size of park bulb for your Prado depends on the model and year of your vehicle. You can check your owner's manual or consult with a parts professional.
2. A small flat-head screwdriver or other prying tool.
3. A replacement lens cover if the current one is broken.
4. Jack and lug wrench if needed.
Here are the steps to replace the park bulb:
1. Open the hood of vehicle and chock the wheels of the Prado.
2. Locate the park bulb assembly. The park bulb assembly is located in the front of the vehicle, near the headlight assembly.
3. Remove the old park bulb. To remove the old park bulb, use a small flat-head screwdriver or other prying tool to pry the bulb out of the socket.
4. Insert the new park bulb. Push the new park bulb into the socket until it clicks into place.
5. Replace the park bulb assembly. Replace the park bulb assembly in the vehicle.
6. Test the new park bulb. Turn on the headlights and make sure that the new park bulb is working properly.
If the lens cover is broken, replace it by doing the following:
1. Lift up the vehicle if needed.
2. Remove the front tire and wheel assembly on the side where you are replacing the bulb.
3. Remove the wheel-house liner cover.
4. Remove the park light assembly from its mounting bolts and disconnect its electrical connector.
5. Replace the park light lens cover after sliding the assembly out its mounting holes.
6. Secure the assembly, its electrical connection, wheel-house liner cover and wheel back in place.
This should complete the replacement process.
