- Disconnect the fuel line.
- Disconnect the throttle cable.
- Disconnect the choke cable.
- Remove the bolts that hold the carburetor in place.
2. Disassemble the carburetor. Once the carburetor is removed, you will need to disassemble it in order to clean it. To do this, you will need to:
- Remove the fuel bowl.
- Remove the float.
- Remove the main jet.
- Remove the pilot jet.
-Remove the needle jet.
3. Clean the carburetor parts. Once the carburetor is disassembled, you will need to clean the parts in order to remove any dirt, debris, or deposits. To do this, you can use a carburetor cleaner and a brush. Be sure to clean all of the parts thoroughly.
4. Reassemble the carburetor. Once the parts are clean, you will need to reassemble the carburetor. To do this, follow the steps in reverse order of disassembly.
5.Reinstall the carburetor. Once the carburetor is reassembled, you will need to reinstall it on the motorcycle. To do this, follow the steps in reverse order of removal.
6. Start the motorcycle and test it. Once the carburetor is reinstalled, you will need to start the motorcycle and test it to make sure that it is working properly.
