1. Turn on the ignition: Insert the key into the ignition and turn it to the "ON" position without starting the engine.
2. Locate the odometer reset button: In most Toyota Hiace models, the odometer reset button is located on the instrument panel, usually near the speedometer or tachometer.
3. Press and hold the odometer reset button: Press and hold the odometer reset button for several seconds until the odometer display starts to blink or reset.
4. Release the button and turn off the ignition: Once the odometer display starts blinking, release the reset button and turn off the ignition.
5. Turn on the ignition again: Wait a few seconds and then turn on the ignition again. The odometer should now display the reset mileage, which is usually zero.
6. Confirm the reset: Drive for a short distance to ensure that the odometer is recording mileage accurately. If the mileage is not incrementing, you may need to repeat the reset procedure.
Please note that the specific steps and button locations may vary depending on the exact model and year of your Toyota Hiace. If you're unsure about the procedure, it's recommended to consult your vehicle's owner's manual or seek professional assistance from a qualified mechanic.
