- Wrench
- Screwdriver
- Fuel drain pan
- Replacement fuel filter
Instructions:
1. Turn off the engine and allow it to cool down.
2. Locate the fuel filter, which is typically located under the vehicle near the fuel tank. It is a cylindrical-shaped component with two fuel lines connected to it.
3. Place the fuel drain pan under the fuel filter.
4. Use the wrench to loosen the fuel line clamps and disconnect the fuel lines from the fuel filter.
5. Use the screwdriver to pry open the fuel filter bracket and remove the fuel filter.
6. Slide the replacement fuel filter into the fuel filter bracket and secure it with the fuel line clamps.
7. Reconnect the fuel lines to the fuel filter and tighten the fuel line clamps.
8. Start the engine and check for leaks. If there are no leaks, you have successfully replaced the fuel filter.
