Essential Tools:
* Jack and jack stands: Crucial for safely lifting the vehicle. Never work under a vehicle supported only by a jack.
* Lug wrench: To remove the wheels.
* Wheel chocks: To prevent the vehicle from rolling.
* Socket wrench set (metric): You'll need various sizes, likely including 13mm, 14mm, and possibly others depending on the specific caliper and rotor bolts. A ratchet and extensions will be very helpful.
* Caliper piston compressor tool: Essential for compressing the caliper piston to make room for the new brake pads. A C-clamp *can* be used in a pinch, but a proper compressor is safer and easier.
* Wrench or socket for caliper mounting bolts: Again, likely 13mm or 14mm.
* Pliers (needle-nose and possibly slip-joint): Helpful for various tasks, such as removing cotter pins (if present).
* Brake cleaner: To clean the caliper and rotor surfaces.
* Torque wrench: To tighten bolts to the manufacturer's specified torque (consult your repair manual). This is crucial for safety.
* Wire brush: To clean the caliper mounting surfaces and rotor if necessary.
Recommended Tools:
* Shop rags or paper towels: For cleaning.
* Gloves: To keep your hands clean.
* Safety glasses: To protect your eyes from flying debris.
* Repair manual: A service manual specific to your 1994 Plymouth Voyager will give you detailed instructions, torque specifications, and diagrams. This is highly recommended, especially for someone unfamiliar with brake work.
Possibly Needed (depending on condition):
* Rotor turning tool: If the rotors are scored or worn, you may need to turn them down to make them flat again. A brake lathe is ideal but not always practical for home mechanics.
* New rotors: If the rotors are too worn to be turned or are damaged.
* New caliper: If your caliper is seized or damaged.
Important Note: Brake work is critical for safety. If you're not comfortable working on brakes, it's best to have a qualified mechanic do the job. Improperly installed brakes can lead to serious accidents. Always consult your vehicle's repair manual for specific instructions and torque specifications.
